Showing 1–20 of 23 results

The TORMEK T-8 maximises the precision thanks to the revolutionary fully cast housing which guarantees minimal play for the Universal Support. This gives you the best conditions possible to succeed with your sharpening. Tormek’s unique drive system is efficient and manages to hold a constant speed, even under full load. The Tormek Original Grindstone sharpens all qualities of steel, including HSS. The machine features a number of elaborated details, like instant stone locking with EzyLock, water trough with lift and a removable magnet scraper for efficient cleansing.

Grindstone: Tormek Original, Aluminium oxide, 250×50 mm 90 rpm, torque 14.7 Nm.
Honing Wheel: Leather 220×31 mm.
Main Shaft: Stainless steel main shaft, stone hardware and EzyLock.
Housing: Zinc cast top and frame. Sides in ABS plastic.
Motor: Industrial single phase, 200 W (input) 230 V, 50 Hz.
Continuous duty, Maintenance free. Silent running, 54 dB. 25,000 hour life.
Dimensions: W 270, D 270, H 330 mm. Weight: Machine 14.8 kg.
Warranty: 7 year warranty.

 

On the new T-8 model, Tormek has integrated the previous mounted sleeves for the Universal Support into the fully cast housing for minimal play; an innovation which improves the control of the sharpening and increases the accuracy of the final results.

With an updated design and several other upgraded details.

    

The Advanced Water Trough has been further improved with a screw lift for an easier fitting and a magnetic scraper for efficient cleansing.

   

For long tools that drip water over the edge of the lip (like chef’s knives and planer blades), you can add the water chute. Set the widest edge of the chute onto the tab in the middle of the lip of the trough and the water chute will direct the water back into the trough from even the longest tools.

The removable scraper incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone clean and cutting more freely. These small steel particles would otherwise be pressed into the stone surface and can affect the sharpening. When you clean the water trough, you’ll find that most of the steel will be located on the magnet. When you remove the scraper, the magnet will release the steel particles and you can easily clean the trough

 

Included with the T-8 model is:

       

$1,250 Incl. GST.

NOW AVAILABLE! 


T-8 Sharpening System with Grindstone 250mm x 50mm, leather honing wheel and universal support with micro adjustment (US-105), which can be placed either vertically in sleeves or horizontally in the base and includes: SE-77, TT-50, SP-650, SG-250, LA-220, US-105, WM-200, PA-70, HB-10, DVD-2.0

Add to cart
$595 Incl. GST.

The Tormek Japanese Waterstone is 4000 grit and delivers a mirror finish with hardly any visible marks. To suit T8/T7/2006 & 4000 � 250 x 50mm

Add to cart
$550 Incl. GST.

Consists of: SVD-185, SVS-50, SVD-110, LA-120, TNT-300, MH-380

Add to cart
$517 $495 Incl. GST.

Sharpens Drill Bits from 3-22mm. Fits all Models.

Add to cart
$400 Incl. GST.

Tormek Blackstone Silicon has been developed for shaping and sharpening HSS and other exotic alloyed steels. To suit T-7/2006 & 4000 � 250 x 50mm

Add to cart
$345 Incl. GST.

For HSS blades of any length. Min width 13mm. Also mitre guillotine blades. For use with T-7 (not T-3 or T-4).

Add to cart
$340 Incl. GST.

Note! NEW Updated to also include SVM-00. This kit contains the jigs for sharpening your knives, scissors, draw knives and axes as well as short chisel and carving tools.

Add to cart
$385 $335 Incl. GST.

The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life. To suit T-7/2006 & 4000 � 250 x 50mm

Add to cart
$323 $295 Incl. GST.

For profiled paint remover blades and all makes and shapes of profile knives with 24, 30 or 38mm distance between guide holes. Not suitable for knives without guide holes.

Add to cart
$169 Incl. GST.

For fingernail shaped turning gouges. Bent carving gouges and V tools. Max tool width 36mm. Also for turning cutters.

Add to cart
$145 Incl. GST.

The Bench Grinder Mounting Set BGM-100 which makes the patented Tormek woodturning system also available for bench grinders.

Add to cart
$133 Incl. GST.

Gently removes the burr, which develops during grinding.

Add to cart
$126 $120 Incl. GST.

For turning skew chisels, parting and beading tools and roughing gouges. Also for straight carving gouges up to 50mm width.

Add to cart
$99 Incl. GST.

For filleting knives. Minimum blade length 160mm

Add to cart
Browse Wishlist
$99 Incl. GST.

For inside honing and polishing of gouges and V tools. Two profiles, 3 mm radius and 60° point.

Add to cart
$89 Incl. GST.

For all size scissors. Also for shears.

Add to cart
$59 Incl. GST.

For turning scrapers, carving scorps and inshaves. Also for re-truing screwdrivers and cabinet scrapers.

Add to cart
$49 Incl. GST.

For straight shanked carving gouges and V tools down to 45mm length and for short wood chisels and tools for power carvers. Max tool width 38mm.

Add to cart
$45 Incl. GST.

For changing the function of the grindstone. The fine side grades the stone for a 1000 grit finish. The coarse side of the grader reverses the stone to normal fast grinding. Activates a glazed stone.

Add to cart
$38 Incl. GST.

For protecting the machine from shavings and wood dust.

Add to cart