The TORMEK T-8 maximises the precision thanks to the revolutionary fully cast housing which guarantees minimal play for the Universal Support. This gives you the best conditions possible to succeed with your sharpening. Tormek’s unique drive system is efficient and manages to hold a constant speed, even under full load. The Tormek Original Grindstone sharpens all qualities of steel, including HSS. The machine features a number of elaborated details, like instant stone locking with EzyLock, water trough with lift and a removable magnet scraper for efficient cleansing.
Grindstone: Tormek Original, Aluminium oxide, 250×50 mm 90 rpm, torque 14.7 Nm.
Honing Wheel: Leather 220×31 mm.
Main Shaft: Stainless steel main shaft, stone hardware and EzyLock.
Housing: Zinc cast top and frame. Sides in ABS plastic.
Motor: Industrial single phase, 200 W (input) 230 V, 50 Hz.
Continuous duty, Maintenance free. Silent running, 54 dB. 25,000 hour life.
Dimensions: W 270, D 270, H 330 mm. Weight: Machine 14.8 kg.
Warranty: 7 year warranty.
On the new T-8 model, Tormek has integrated the previous mounted sleeves for the Universal Support into the fully cast housing for minimal play; an innovation which improves the control of the sharpening and increases the accuracy of the final results.
With an updated design and several other upgraded details.
The Advanced Water Trough has been further improved with a screw lift for an easier fitting and a magnetic scraper for efficient cleansing.
For long tools that drip water over the edge of the lip (like chef’s knives and planer blades), you can add the water chute. Set the widest edge of the chute onto the tab in the middle of the lip of the trough and the water chute will direct the water back into the trough from even the longest tools.
The removable scraper incorporates a strong magnet, which attracts the steel particles ground from the tools being sharpened. This keeps your stone clean and cutting more freely. These small steel particles would otherwise be pressed into the stone surface and can affect the sharpening. When you clean the water trough, you’ll find that most of the steel will be located on the magnet. When you remove the scraper, the magnet will release the steel particles and you can easily clean the trough
Included with the T-8 model is:
T-8 Sharpening System with Grindstone 250mm x 50mm, leather honing wheel and universal support with micro adjustment (US-105), which can be placed either vertically in sleeves or horizontally in the base and includes: SE-77, TT-50, SP-650, SG-250, LA-220, US-105, WM-200, PA-70, HB-10, DVD-2.0
The Tormek Japanese Waterstone is 4000 grit and delivers a mirror finish with hardly any visible marks. To suit T8/T7/2006 & 4000 � 250 x 50mm
Sharpens Drill Bits from 3-22mm. Fits all Models.
Tormek Blackstone Silicon has been developed for shaping and sharpening HSS and other exotic alloyed steels. To suit T-7/2006 & 4000 � 250 x 50mm
Note! NEW Updated to also include SVM-00. This kit contains the jigs for sharpening your knives, scissors, draw knives and axes as well as short chisel and carving tools.
The Tormek Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish and a long life. To suit T-7/2006 & 4000 � 250 x 50mm
For profiled paint remover blades and all makes and shapes of profile knives with 24, 30 or 38mm distance between guide holes. Not suitable for knives without guide holes.
For turning skew chisels, parting and beading tools and roughing gouges. Also for straight carving gouges up to 50mm width.
For changing the function of the grindstone. The fine side grades the stone for a 1000 grit finish. The coarse side of the grader reverses the stone to normal fast grinding. Activates a glazed stone.