TORMEK Planer/Jointer Blade Jig (SVH-320)
$345 Incl. GST.
For HSS blades of any length. Min width 13mm. Also mitre guillotine blades. For use with T-7 (not T-3 or T-4).
Available on backorder
You can make a two part payment for this product. Make initial payment now and final payment when ready.
Item will be shipped after final payment.
For blades of any length. Blades longer than 270 mm (10½”) are relocated in the blade holder and ground in two steps. The grinding depth can be set within 0,1 mm (0,004″). Min width of blade 13 mm (½”).
The attachment comprises support (1), blade holder (2) and allen key (3). In this attachment the tool is guided precisely and ground flat along its whole length to a pre-set fixed depth. This is not the case with the other Tormek jigs, where your hand decides where the grinding occurs and the depth of grinding. It is important that the grinding angle is set with great accuracy. If you follow the detailed step by step instructions carefully, you will be satisfied with the results.
| Product Type |
|---|
Be the first to review “TORMEK Planer/Jointer Blade Jig (SVH-320)”
Related products
For application on the leather honing wheels. Grain size 3 micron (average). Removes the burr and polishes the edge to a mirror finish.
For changing the function of the grindstone. The fine side grades the stone for a 1000 grit finish. The coarse side of the grader reverses the stone to normal fast grinding. Activates a glazed stone.
For turning skew chisels, parting and beading tools and roughing gouges. Also for straight carving gouges up to 50mm width.
For turning scrapers, carving scorps and inshaves. Also for re-truing screwdrivers and cabinet scrapers.
Note! NEW Updated to also include SVM-00. This kit contains the jigs for sharpening your knives, scissors, draw knives and axes as well as short chisel and carving tools.
The Tormek Japanese Waterstone is 4000 grit and delivers a mirror finish with hardly any visible marks. To suit T8/T7/2006 & 4000 � 250 x 50mm
Reviews
There are no reviews yet.